Guide :Saws : DW744S 10" Portable Table Saw with Stand

DW735 Planer won't start

I was using it just fine this morning, but when I tried to turn it on this afternoon, it won't start. I know the circuit I'm plugged into is live.

Research, Knowledge and Information :


Dewalt 735 Planer Motor Stopped Working-Please Help - by ...


**Dewalt 735 Planer- 4 yrs old, motor stopped working, checked brushes and they are still good, just won't turn back on. Any suggestions from any of you pros? Or is ...
Read More At : lumberjocks.com...

any dewalt planer repair experts? - JustAnswer


any dewalt planer repair experts?Brand: dewalt 735 planer Model Number: dw735 What have you tried so far?: Dewalt planer stopped and wont start, checked for power to ...
Read More At : www.justanswer.com...

New DW735, not feeding, any troubleshooting tips ...


Anyone have an idea of why a new planer won't ... Materials & Safety > Power Tools & Machinery > New DW735, not feeding, any troubleshooting tips ... Start it up ...
Read More At : www.woodworkingtalk.com...

DEWALT DW735 13-Inch, Two Speed Thickness Planer - Power ...


DEWALT DW735 13-Inch, ... To start the action, ... DEWALT DW735 Two-Speed Thickness Planer Package, 13-Inch 4.5 out of 5 stars 565.

dewalt planer dw735 roller not pulling wood through - Power ...


our planer is not pulling wood through. the roller's ... How did you get the rollers to turn to clean them? mine won't turn with ... dewalt planer dw735 roller not ...
Read More At : www.woodtalkonline.com...

13" Three Knife, Two Speed Thickness Planer - DW735 | DEWALT


The DW735 13" Three Knife, Two Speed Thickness Planer is powered by a 15 Amp motor to easily managing large cuts in wider materials. Three-knife cutter head with ...
Read More At : www.dewalt.com...

Tool Talk #10: My DW735 Planer | Jays Custom Creations


I have no objections to responding to them but I thought it would be beneficial to start a video ... These won’t be in depth ... DW735 Planer. I purchased the ...
Read More At : jayscustomcreations.com...

Suggested Questions And Answer :


DW735 Planer won't start


My planer seem to skip as it is drawing the board through.
Read More At : DW744S 10" Portable Table Saw with Stand...

Feeding speed is erratic


I had a solid bearing wear out on the feed roller and it won't push the board through. I ordered the part and replaced it (it was worn egg shaped) and it works great now. On another subject, I'm getting a lot of chips inside the main housing and I don't know where it;s coming from. I use a dust collector a ready.
Read More At : DW744S 10" Portable Table Saw with Stand...

How to change mitre saw blades - Dewalt DW744S 10" Portable Table Saw with Stand


You need to remove the "throat" plate and raise the blade fully. UNPLUG SAW FIRST there are 2 wrenches on the side one for the hex nut and the other for the arbor, the threads are standard. let me know if you need more assistance
Read More At : DW744S 10" Portable Table Saw with Stand...

Replace brushes , saw will not run - Dewalt DW744S 10" Portable Table Saw with Stand


When you replaced the brushes did you polish them down so that they slid into the holders or did you just push them in Most of these brushes are a bit oversized and tend to stick just as they leave the holder and before they get near to the commutator of the armature. It is worth taking them back out and using a bit of fine sandpaper shave off a little piece of the material on all sides Put the brushes back in and make sure that they slide down the holder and bottom out on the surface of the armature.
Read More At : DW744S 10" Portable Table Saw with Stand...

Motor sounds funny can i fix - Dewalt DW744S 10" Portable Table Saw with Stand


If you are mechanically inclined, unplug tool and turn tool on its backside to expose the motor, remove the cover from the end and remove the brushes, then there are 4 screws that are aT25 torx head that holds the motor housing to the diaphragm, you might have to pry it some,I believe the commutator bearing is freezing up but would replace both of them
Read More At : DW744S 10" Portable Table Saw with Stand...

Runs one or two mintues then borgs down - Dewalt DW744S 10" Portable Table Saw with Stand


Sounds like you may have dirty bearings on the motor or the arbor shaft. When the bearings heat up it causes expansion thus slowing the saw. try to lube the bearings with some penetrating oil, Better yet, get some BelRay chain lube. It will penetrate like WD40 but will firm up like grease give you better lubrication for the bearings.
Read More At : DW744S 10" Portable Table Saw with Stand...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.powertoolz.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0644 seconds