Guide :Saws : DW824 5" Electric Angle Grinder

Safety Problem how to protect my eyes?

Posted by zizi tripo on Aug 27, 2008

Research, Knowledge and Information :


Protecting Your Eyes at Work - American Optometric Association


Protecting Your Eyes at Work. ... How can I protect my eyes from ... There are four things you can do to protect your eyes from injury: Know the eye safety dangers at ...
Read More At : www.aoa.org...

Eye Safety at Work | Prevent Blindness


What's Your Risk of a Vision Problem? ... When Should I Protect My Eyes at Work? ... The type of safety eye protection you should wear depends on the hazards in your ...
Read More At : www.preventblindness.org...

How to protect my eyes from damage if I am in ... - Quora


Our eyes are one of the most vital external organs, so its our duty to protect them from outside damages. Here we have mentioned some important eyes safety t...
Read More At : www.quora.com...

10 Tips for Computer Eye Strain Relief - AllAboutVision.com


According to the National Institute of Occupational Safety and ... digital habits and has developed lens and coating technology to protect the eyes from blue ...
Read More At : www.allaboutvision.com...

Sun, UV Radiation and Your Eyes - American Academy of ...


Keep an Eye on Ultraviolet (UV) Safety. Eye medical doctors (ophthalmologists) ... Follow these tips to protect your eyes from the sun all year long:
Read More At : www.aao.org...

SAFETY MEETING TOPIC: Eye Protection


SAFETY MEETING TOPIC: Eye Protection . ... But my dark glasses help protect my eyes from the sun, ... Can I use my dark safety glasses for welding, ...
Read More At : www.ehscompliance.com...

5 Ways to Protect Your Eyes in Summer - WebMD


Hazards to your eyes are lurking around every corner, but WebMD has 5 essential ways to protect yourself against eye injury. ... 5 Ways to Protect Your Eyes in Summer.
Read More At : www.webmd.com...

3 Ways to Protect Your Eyes - wikiHow


How to Protect Your Eyes. ... goggles, or safety glasses to avoid injury. ... Now I know how to protect my eyes."..." more. II Izzy I.
Read More At : www.wikihow.com...

6 Tips for Eye Health and Maintaining Good Eyesight


Good eye health starts with the food on your plate. ... Wraparound lenses help protect your eyes from the side. ... wear safety glasses or protective goggles.
Read More At : www.webmd.com...

Protect Your Eyes: Everyday Steps to Sun Safety


Protect Your Eyes: Everyday Steps to Sun Safety. by Rene S. Rodriguez-Sains, MD. For most of us, the eyes are the most cherished of our senses. Yet we potentially ...
Read More At : www.skincancer.org...

Suggested Questions And Answer :


Safety Problem how to protect my eyes?


Use proper face shield and go for regular eye checkups. Go through the healthy and safety training by your organization, they should provide you proper training before giving you any job. I suggest SSSTS health and safety training courses for better working environment and safe workplace.
Read More At : DW824 5" Electric Angle Grinder...

Armature problems Can anyone tell me how to remove the armature for inspection on a makita 5" angle grinder model 9005b?


Http://www.toolsandmachinery.com/blog2/tag/repair-9564cv-grinder/
Read More At : 9005B 5" Electric Angle Grinder...

Why does my dw831 grinder keep tripping circuit breakers?


Try checking the brushes. to do this: remove the 2 small covers on the left and right side of the tool and push aside the coil spring holding in the brush. the brush should freely pull out of the holder. when you have the covers off, look for charring or melting. and after the brushes are out, rotate the arbor to move the armature inside and look to make sure it's not charred. if that doesnt help, take apart the handle and look for melted or exposed wire. dewalt likes to pack the wires in tight among the screws and sometimes the normal vibration of the tool will cause a screw to cut into a wire and short the wire. new brushes and holders (if melted) are usually around 20 dollars US
Read More At : DW824 5" Electric Angle Grinder...

I have three makita grinders they are the best. One problem I have though is the push down button for locking the spindle for removing the disk on two of the grinders seems to be worn out .Is there any way of repairing them?


Yes there is, go to "makitausa.com" and with your model number you can download a breakdown for these tools. There is a plastic cap that snaps on the pin, you will have to replace the cap also but after removing the gear housing you pry the cap off and them remove the lock pin. Clean the area on top before reinstalling. Let me know if you need more assistance and I would need the model numbers so I can give you part number.
Read More At : 9005B 5" Electric Angle Grinder...

Grinder problems Hi i have a d28494 6000rpm dewalt grinder. it will not do anything when i plug it in. if you could give me any advice that would be great thanks Dusty


HiCheck the power suply cord, the switch ONN/OFF ;the brushes and the electric engine(field and armature). best regards savumihai71
Read More At : D28494N 7" and larger Electric angle grinders...

Dewalt dw474 grinder quit


You need new brushes. carbon is meant to be touching the armature not the contact from the spring. Its worn down
Read More At : DW824 5" Electric Angle Grinder...

The electric keeps tripping in my house, why is this?


It is something that is being pluged in or a short in 1 of the plugs on that circut
Read More At : DW824 5" Electric Angle Grinder...

Bosch angle grinder acts like its burnt out but motor resistance values suggest not


Hi Brian, running your angle grinder on reduced voltage (through overloading the petrol generator) will have caused the current in the grinder to be higher than it should be. This may not be what you expect, but it is a characteristic of rotating machines, they behave differently to resistive machines such as heating elements. You have not indicated how you come to the conclusion that the windings test OK. If you have just checked with an ohm-meter and see a continuity reading, this does not eliminate the possibility that the overheating resulting from over-current has broken down the insulation (evidenced by the smell and sparks) and you have short circuited windings. The grinder will run without a suppression capacitor, it is just there to minimise interference with you neighbour's (or your wife/girlfriend/daughter's :) ) radio. Replacing the capacitor will not restore your grinder, I reckon you have killed it, in spite of the fact that running it on a healthy supply was to quickest way to cool it effectively.
Read More At : Bosch...

Bosch angle grinder


Replace capacitor, Yes it would give those symptoms
Read More At : Bosch...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.powertoolz.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0335 seconds