Guide :Saws : 12" Compound Miter Saw 3912

Putting on a saw blade

The bolt that needs to be removed in order to put on a saw blade is on so tight that i cant get it loose. there is no blade on it right now. this problem is for a bosch 12" compound mitre saw. please help

Research, Knowledge and Information :


Sep 03, 2014 · In this video l show you how to put on a chain saw chain so it's facing the right direction, and how to tighten it up so it cuts the way it should.

How to Replace a Saw Blade - YouTube

Oct 23, 2008 · Learn how to safely and easily replace a saw blade in this free educational video series. Expert: Jon Olson Bio: Jon holds a Bachelors of Science in ...

How to Install your Band Saw Blade -

Unplug the saw, then loosen the tension on the upper wheel. With all the blade guides backed off, slip the new blade around the wheels and then ...
Read More At :

How to Properly Change Band Saw Blades - The Spruce

Learn how to change the blade on your bandsaw and how to adjust the saw to keep it tracking properly.
Read More At :

Changing Blades on the 14" Bandsaw: 9 Steps (with Pictures)

Changing the blade on a bandsaw can be a real pain in the Wazoo. Most of us will use the wrong blade for a job just because it takes so long to change to the right blade.
Read More At :

How to Replace a Chainsaw Chain: 9 Steps - Instructables

Steps to Replace a Chainsaw Chain Other chainsaw ... The old chain is ready to be removed now that the sprocket plate is off of the saw. ... put some tension ...
Read More At :

How to Put a Chain Back on a Chainsaw | Hunker

Operating a chainsaw is a necessary wintertime task in many rural locations around the world; however, would you know how to put a chain back on a chainsaw bar if it ...
Read More At :

Circular Saw Blade Buying Guide - Lowe's - Lowe's Home ...

The right saw blade is a key part of a successful woodworking project. Learn how to find the best circular saw blade for your work.
Read More At :

7 in. Diamond Tile Circular Saw Blade - The Home Depot

7 in. Husky Tile Diamond Blade - For cutting tile and marble. Fast and consistent cutting performance. Wet cutting. 5/8 in. arbor at a max RPM of 8,730. 150 times ...
Read More At :

The How's of Setting Saws

Saw blades of very recent manufacture are also usually the same thickness throughout, ... Actually, setting a saw is a fairly quick and easy task.
Read More At :

Suggested Questions And Answer :

Motor on miter saw is runnig back wards

I would suggest going to and typing in your model number and pulling up a wiring schematic for this tool. If your switch and field are not as shown on this breakdown (its a good one) I would either take it to a repair center or change what is wrong one wire at a time. They also have a toll free number and would be more than willing to help with your problem. Let me know and have a good day. P.S. I would not run the blade backwards though.
Read More At : 10" Magnum Compound Miter Saw...

Putting on a saw blade

Most of the miter saw the bolt should remove to left hand/left. I broke my because I did the opposite. Good luck
Read More At : 12" Compound Miter Saw 3912...

Ryobi TSS100L blade guard spring

I think what you are refering to is a circlip washer , and can only be fitted with ( CIRCLIP PLIERS ) do you know any Michanics or Engineers as they are bound to have a set in their toolbox ,on the other hand you can buy them. What they do is work in the opposit way normal pliers do when you squees the handles together the jaws open,therefor opening the (CIRCLIP ) and allowing you to place it over the pin and into the recess. Hope this has been of some hellp goodluck T.C.
Read More At : Saw. 13 Amp 10 in. Sliding Compound Miter Saw with Laser......

Concept MS100 mitre saw blade guard dillema.

I have changed the blade a few times, There is no need to remove the spring, etc. All you do is remove the bolt holding the guard and rotate it counter clockwise and it exposes the blade. I am looking for parts for this saw. Anyone know where to get them?
Read More At : 10" Dual Bevel Sliding Compound Miter Saw...

Dw705 12" mitersaw

I do not know your machine but from previous experience I know that a sircular saw blade wobbles when it was over heated during use.
Read More At : DW715 Heavy Duty 12" Single - Bevel Compound Miter Saw...

Lower Blade Guard on a Miter saw

If you haven't fixed them yet, give me the model and brand and I will see what I can do. Dave
Read More At : 12" Dual - Bevel Compound Miter Saw with Upfront Controls......

I have just gotten my Hitachi 10'' compound mitre saw (C10FCE2) out of the box, and have disengaged the packing pin, and put on the stabilizion bar and handle. I can not seem to get the blade to tilt back to perpendicular with the table surface. I have loosened the one exposed bevel screw (hegagonal in the front) but that doesn't seem to help. The tilt handle will not move. What am I missing?

The hndle at the front is for your mitre. there should be one at rear of tool to bevel (COMPOUND) IT SHOULD HAVE A HANDLE AS WELL possibly left hand thread !
Read More At : C10FCE2 10" Compound Miter Saw...

I have purchased a dewalt 718, 12 inch sliding double bevel saw , private sale, saw was only used a couple of times and is in new condition .Checked cutting bevels and found that the left 45 degree does not lock in at true 45 degree,tried adjusting but unable to adjust the latch plate far enough clockwise for the latch to give a true 45 degree.Also when the saw is put in 0 degree there is side to side movement until the bevel lock is set. the problem may be due to the bevel latch,it seems to be sloppy. is it possible the bevel latch is faulty ?

The fence may be getting in the way of the arm when you adjust the trunion assembly fully to one side or the other for bevel cutting. Adjusting the fence all the way out away from the trunion assy. should allow full 45deg adjustment. If this is not the case, it could be--even though its only slightly used--that there is sawdust built up enough in the housing to keep the arm from fully adjusting. While the latch COULD indeed be faulty, it generally should always be tightened/locked so that the trunion assy. is fimly "locked" before cutting as this is designed to keep the saw from shifting mid cut, causing binding, uneven cuts, broken blades, seized bearings, etc.
Read More At : Heavy - Duty 12" Double - Bevel Sliding Compound Miter Saw......

One of my apprent's took the blade guard off my saw and it's now in pieces. I've tired to put it back together but no love! My saw is Makita LS1214. Please provide instructions on how the parts go back together.

Http:// Here is a link for your parts diagram and owners manual. I hope this helps!
Read More At : 10" Dual Bevel Sliding Compound Miter Saw...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0805 seconds